How Does It Work?

HOW TO TURN ON YOUR SABER:

To turn on your Lightsaber press and hold the button for 1 second.

Turn your lightsaber off by pressing and holding the button for 4 seconds.

You can put your Lightsaber into deep sleep mode (the best mode to save your battery life) by pressing and holding the button for 10 seconds.

If you'd like to turn your lightsaber on when in deep sleep mode press and hold the button for 4 seconds.

 

EFFECTS

Blaster effects are activated by pressing the button once.

To activate the lock-up loop you have to press the button for 1 second, release your finger and quickly press it again. You can deactivate the lock-up loop by pressing the button again.

Clash effects are produced automatically.

 

COLORS

Press and hold the button for 3 seconds. You have now activated color switch and you can switch through colors by pressing the button once.

To deactivate color switching press and hold the button for 3 seconds.

 

SOUND FONTS

If you want to change between the sound fonts turn off the lightsaber. When the lightsaber is turned off press and hold the button for 2 seconds to switch between sound fonts.

 

VOLUME

You can change your lightsaber volume by turning off your lightsabers. Once your lightsaber has been turned off press and hold the button for 1 second. You can now change the volume to your preference

 

CHANGING THE BLADE

All our lightsaber come with tools to unscrew the lightsaber. The screw holes can be found on top of the lightsaber hilt. Just simply remove the screws and remove or place your blade in the hilt. When putting in your blade make sure to tightly screw it otherwise the blade can fall out.